Telecrib® Struts

Telecrib® Struts

LIGHTER, STRONGER COMPOSITE TELECRIB® STRUTS SAVE LIVES

LIGHTER, STRONGER COMPOSITE TELECRIB® STRUTS SAVE LIVES

Request More Info

TeleCrib® Struts are a lightweight, compact, telescoping stabilization tool designed for rescuer and patient safety during extrication.

4X AS STRONG AS STEEL STRUTS

Rescue 42 is the only rescue company to manufacture struts using DuPontKevlar® infused composite material, making the TeleCrib® struts about half the weight of steel struts and 4X as strong.

Download Telecrib® Strut Sales Sheet (PDF)

18,000 LBS WORKING LOAD

Most steel struts have a maximum working load of 4,000 lbs. The TeleCrib® struts have a max working load of 18,000 lbs with a greater than 2:1 safety factor. Because they are composite, they are nearly impervious to environmental or chemical corrosion, do not conduct electricity, and have exceptional impact resistance. If you need lifting capabilities, our removable Strut Jack fits on any TeleCrib® strut, turning it into an 8,000 lb ram.

Thousands of fire-rescue departments across the US and Canada trust TeleCrib® Struts to stabilize their most dangerous wrecks.

Visit our TRAINING VIDEO page to view the entire Instructional TeleCrib® video.

Contact your local sales rep for more information. 888-427-3728

Download complete TeleCrib® technical specifications US (pdf)

Download complete TeleCrib® technical specifications Metric (pdf)

LENGTH
1 PIN
2 PINS
3′
10,000
18,000
4′
10,000
15,000
5′
10,000
11,000
6′
8,000
8,000
7′
5,000
5,000
8′
4,000
4,000

 

Rescue 42 TeleCrib® composite struts contain DuPont™ Kevlar® fiber. DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

 

  • Strut tubes are made of an advanced composite infused with Kevlar® fiber making them lightweight, but 4x stronger than steel
  • Composite tubes are resistant to environmental and chemically corrosive materials (battery acid, salts, water, fuels, etc.) and offer exceptional impact resistance. Tubes are electrically non-conductive.
  • 18,000 lb max working load with 2:1 safety factor
  • Fully collapsing struts are ultra compact for storage
  • No couplings, twist locks or guess work – just slide out as much strut as you need and pin it. Simple design is easy to use reduces training time.
  • Removable Strut Jack turns any strut into an 8,000 lb ram
  • Universal Combi-head with piercing point, 3/8″ chain slot, 2×4 / 2×6 center support with nail holes reduces response time, no fumbling around looking for the right accessory head
  • Large, yellow, glove friendly pins – easy to use and find when dropped
  • Safety interlock system prevents over-extension of strut tubes
  • Removable Base Plate articulates 180˚, accepts ratchet strap hooks or pickets
  • Comprehensive kits include accessories to accommodate advanced stabilization needs
  • Proudly manufactured in the USA
Rescue 42 TeleCrib® composite struts contain DuPont™ Kevlar® fiber. DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

 

For a Complete List of Our Stabilization Accessories CLICK HERE

  • TeleCrib® Strut Jack (CTC-503): A removable 8,000 lb jack which fits over the strut body and gives the rescuer a controlled means for lifting or lowering a load. The Jack has a 15″ range, but can be used to raise or lower the entire extension of both strut sizes by pinning the strut and resetting the jack. Because it is removable, it can be moved from strut to strut as needed, minimizing storage requirements, cost and kit weight.
  • Picket (CTC-520): 1″ diameter x 3.5′ long x 2 ¾” head – Good to use when other anchor systems are not available. Can be driven through picket holes in the TeleCrib® baseplate to secure struts to the ground
  • Chain (CTC-521): 3/8″ x 20′, grade 70 with grab hooks at both ends, 6,600 lb working load. TeleCrib® combi-heads are designed with a 3/8″ chain slot to use with chain saddling techniques.
  • Strut Mount Brackets (CTC-524): Perfect for securing struts to any compartment surface or pullout tray. 2 per set.
  • Extra Components (All or most of the following components come standard with kits)
    — Ratchet Strap
    — Hook Cluster
    — Cinch Ring
    — Screw Jack Head
    — A-Frame Head
    — Spike Foot
    — Large Accessory Bag
    — Spare Pins (yellow strut pins/steel base pins)

Contact an Authorized Dealer to schedule a demo or place an order.

Rescue 42 TeleCrib® composite struts contain DuPont™ Kevlar® fiber. DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

Upgrade Your Existing Struts:

  • Upgrade: Engine Kit – Gen2 to Gen3
    Includes: (1) set of long strut tubes (1) set of short strut tubes, (2) ratchet straps, (1) small accessory bag, (1) instructional DVD.
  • Upgrade: Truck Kit – Gen2 to Gen3
    Includes: (2) sets of long strut tubes (2) sets of short strut tubes, (4) ratchet straps, (1) spike foot, (1) large accessory bag, (1) instructional DVD.
  • Upgrade: Truck/Tripod Kit – Gen2 to Gen3
    Includes: (3) sets of long strut tubes (1) set of short strut tubes, (4) ratchet straps, (3) spike feet, (1) large accessory bag, (1) instructional DVD.
  • Upgrade: Rescue Kit – Gen2 to Gen3
    Includes: (4) sets of long strut tubes (4) sets of short strut tubes, (8) ratchet straps, (2) spike feet, (2) large accessory bag, (1) instructional DVD.
  • Upgrade: Rescue/Tripod Kit – Gen2-Gen3
    Includes: (4) sets of long strut tubes (4) sets of short strut tubes, (8) ratchet straps, (3) spike feet, (2) large accessory bags, (1) instructional DVD.
  • Upgrade: CTC-522 CTC-6002 to CTC-6004 Kit (1 Tripod head w/ base safety chain, 1 CTC-501, 2 CTC-511, 1 small accessory bag)
  • Upgrade: CTC-523 Upgrade CTC-6003 to CTC-6005 Kit (1 Tripod head w/ base safety chain, 1 CTC-511)

Contact an Authorized Dealer to schedule a demo or place an order.

Rescue 42 TeleCrib® composite struts contain DuPont™ Kevlar® fiber. DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

 

We have a TeleCrib® strut kit to fit every department’s needs and budget.
View Strut Kit Accessories 


TeleCrib Engine Kit | CTC-6001   A small, compact kit designed for Engines or Pumpers with limited compartment space, but who may carry a combo extrication tool for light extrication. Includes: 1 Long Strut, 1 Short Strut, 2-27’ Straps, 1 Screw Jack Head, 1 Hook Cluster, 1 Cinch Ring, 1 Spare Strut Pin, 1 Spare Base Pin, 1 Accessory Bag and Instructional DVD. Total kit weight: 75 lbs.

Modified Engine Kit w/ 2 Long Struts | CTC-6001LL


TeleCrib Truck Kit | CTC-6002   Our most popular kit contains two short and two long struts, plus all the accessories needed to stabilize one to two cars in most extrication scenarios. Includes: 2 Long Struts, 2 Short Struts, 4-27’ Straps, 1 Screw Jack Head, 1 A-Frame Head, 1 Spike Foot, 1 Hook Cluster, 1 Cinch Ring, 1 Spare Strut Pin, 1 Spare Base Pin, 1 Accessory Bag and Instructional DVD. Total kit weight: 160 lbs.

Modified Truck Kit w/ 4 Long Struts | CTC-6002LL


TeleCrib Rescue Kit | CTC-6003   Our largest stabilization kit with four short and four large struts is intended for dedicated rescue squads, for multi-car and advanced extrication scenes. Includes: 4 Long Struts, 4 Short Struts, 8-27’ Straps, 2 Screw Jack Heads, 1 A-Frame Head, 2 Spike Feet, 2 Hook Clusters, 2 Cinch Rings, 1 Spare Strut Pin, 1 Spare Base Pin, 2 Accessory Bags and Instructional DVD. Total kit weight: 320 lbs.


TeleCrib Squad Kit | CTC-6006   A mixed kit that includes 2 TeleCrib Junior struts for simple stabilization, and 2 long TeleCrib System struts and accessories for advanced stabilization.  Includes: 2 TeleCrib Junior Struts, 2 Long Struts, 2-27’ Straps, 2 Hook Clusters, 1 Cinch Ring, 2 Spike Feet, 1 Spare Strut Pin, 1 Spare Base Pin, 1 Accessory Bag and Instructional DD. Total kit weight: 160 lbs.


TeleCrib Truck/Tripod Kit | CTC-6004   This kit comes with one short and three long struts to make a 2 person, OSHA compliant tripod. Includes all of the accessories for both extrication stabilization and a confined space rescue platform without taking up any additional compartment space. Includes: 3 Long Struts, 1 Short Strut, 4- 27’ Straps, 1 Tripod Head, 1 Safety Chain, 1 Screw Jack Head, 3 Tripod Spike Feet, 1 Hook Cluster, 1 Cinch Ring, 1 Spare Strut Pin, 1 Spare Base Pin, 1 Large and 1 Small Accessory Bag and Instructional DVD. Total kit weight: 190 lbs.


TeleCrib Rescue/Tripod Kit | CTC-6005   This large kit contains 4 short and 4 long struts with stabilization and tripod accessories. Use this kit for both advanced stabilization and as an OSHA compliant, 2 person rated tripod without taking up any additional compartment space. Includes: 4 Long Struts, 4 Short Struts, 8-27’ Straps, 1 Tripod Head, 1 Safety Chain, 2 Screw Jack Heads, 3 Tripod Spike Feet, 2 Hook Clusters, 2 Cinch Rings, 1 Spare Strut Pin, 1 Spare Base Pin, 2 Accessory Bags and Instructional DVD. Total kit weight: 340 lbs.

For pricing information please contact an Authorized Dealer to schedule a demo or place an order.

Rescue 42 TeleCrib® composite struts contain DuPont™ Kevlar® fiber. DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

Rescue 42 TeleCrib® composite struts contain DuPont™ Kevlar® fiber. DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

TeleCrib® struts are a lightweight, compact, telescoping stabilization tool designed for rescuer and patient safety during extrication.

Recent Posts

2023 Events

Mar. 6-7:  AHIMTA Symposium 2023 | Long Beach, CA | MiniCRD, SLC Mar. 29-30:  IWCE 2023  | Las Vegas, NV | Booth 1966 |

Read More >

We Make Internet Possible. Anytime. Anywhere.

Location

370 Ryan Avenue, Suite 120
Chico, CA. 95973

Call Us

SALES & SUPPORT: (888) 427-3728